Air rods form an important part of the air termination network of a lightning protection system. All of our air rods are supplied with a locknut enabling the rod to be locked tight against the conductor.

Used in conjuction with the taper pointed copper air rods.

Light duty saddles are used used to support air rods on at roof surface.

Metallix DC clips secure the at tape conductor to the building surface

Global Square tap clamps are manufactured from high quality alloys of either copper or aluminium providing an effective law resistance connection between overlaping tapes

Ridge Saddles are used to support air rods on roof ridges.

Flat saddles are used to support air rods on at roof surface

Mounting bracket are hardware product use to attach electric wiring and conductors to walls and studs during building constructions

The rod to tape couplings are use to unable the flat tap to be connected to the air rod.

Tape clips hold the at tape conductor ush to the building surface. Fix countersunk woodscrew 1 1/2” x No. 10 and No. 10 wall plug

High Copper Alloy

Designed to join a range of tape size in a straight through position. In many applications the clamp enables tapes to be overlapped and secured by the two set of screws.

The Screw down test clamp allows easy access to copper conductors where frequent inspection and testing may be necessary.

This Clamp is used to form a disconnecting joint between the down conductor and earthing system

These ‘B’ bonds are used for bonding aluminium and copper tapes to at metal surface.

These connectors are used to join aluminium and copper tapes together. They are a neat practical jointing method without the need for tinning, riveting or wrapping the joint.

Designed to bond large diameter metallic pipes into the earthing & lightening protection system.

This pipe bonds can be used on any application where tape can be wrapped around objects such as pipes or rails.

These saddles can be installed horizontally on roofs or vertically on parapets and are used in conjunction with the air rods show above. The saddles are suitable for use with 8mm diameter solid circle conductor as well as 25 x 3mm at tape.

One hole conductor clips provide an easy method of xing copper and aluminium conductors to surfaces

These four-way connectors are suitable for crossing over, making straight joints and tee connections with solid circular conductor.

‘T’ clamps are designed for a three way connection of lightning protection or earthing conductors

Four-way Connector is suitable for crossing over flat tape and solid circular conductor. It will also serve for making straight through joints and tee connections.

These clamps are designed for bonding 8mm solid circular conductors onto metal surface

These Multi-Purpose B Bonds can be used for bonding both 25x3mm at tape & 8mm diameter solid circular conductor to at metal surface.

Used to bond 8mm bare solid circular conductors to metal surfaces

Enables the standard cable to be connected to the air rod. Used in conjunction with the side mounting air rod brackets

Stainless Steel, Carbon Steel, Brass & Copper

Square Clamps provides four way connection and are suitable for crossing over cable

Suitable for cross and T connections between conductors

Stainless Steel, Brass & Copper

Stainless Steel, Brass & Copper

High conductivity bare copper tape is used on both lightening protection & earthing applications. It is annealed for ease of use & has radius edgesr